Wireless charging panel could power all the devices in your living room
A wireless charging system has been developed that could transform an entire room into a charging station for multiple devices simultaneously.
Although work on the project is still at an early stage, engineers at Duke University, the University of Washington and Intellectual Ventures’ Invention Science Fund believe such a system is already capable of being built.
“Whether it’s headphones, cell phones, watches, or even your mouse and keyboard, a major irritation for consumers is the hassle of being tethered to cords to recharge batteries,” said David Smith, professor at Duke.
“And of course they always run dry at the worst possible moment. Our proposed system would be able to automatically and continuously charge any device anywhere within a room, making dead batteries a thing of the past.”
Some wireless charging systems already exist to help power speakers, cell phones and tablets. These technologies rely on platforms that require their own wires, however, and the devices must be placed in the immediate vicinity of the charging station.
This is because existing chargers use the resonant magnetic near-field to transfer energy. The magnetic field produced by current flowing in a coil of wire can be quite large close to the coil and can induce a similar current in a neighbouring coil. Magnetic fields also have the added bonus of being considered safe for human exposure, making them a convenient choice for wireless power transfer.
The magnetic near-field approach, however, is not an option for power transfer over larger distances. This is because the coupling between source and receiver, and thus the power transfer efficiency, drops rapidly with distance. The wireless power transfer system proposed in the new paper operates at much higher microwave frequencies, where the power transfer distance can extend well beyond the confines of a room.
To maintain reasonable levels of power transfer efficiency, the key to the system is to operate in the Fresnel zone – a region of an electromagnetic field that can be focused, allowing power density to reach levels sufficient to charge many devices with high efficiency.
“As long as you’re within a certain distance, you can build antennas that gather electromagnetic energy and focus it, much like a lens can focus a beam of light,” explained Smith.
The problem to date has been that the antennas in a wireless power transfer system would need to be able to focus on any device within a room. This could be done with a movable antenna dish, for example, but that would take up too much space, and nobody wants a big, moving satellite dish on their mantel.
Another solution is a phased array – an antenna with a lot of tiny antennas grouped together, each of which can be independently adjusted and tuned. That technology also exists, but would be too costly and consume too much energy for household use.
The solution proposed by Smith and his colleagues instead relies on metamaterials – a synthetic material composed of many individual, engineered cells that together produce properties not found in nature.
“Imagine you have an electromagnetic wave front moving through a flat surface made of thousands of tiny electrical cells,” said Smith. “If you can tune each cell to manipulate the wave in a specific way, you can dictate exactly what the field looks like when it comes out on the other side.”
According to their study, a flat metamaterial device no bigger than a typical flat-screen television could focus beams of microwave energy down to a spot about the size of a cell phone within a distance of up to 10 metres. It should also be capable of powering more than one device at the same time.
“The ability to safely direct focused beams of microwave energy to charge specific devices, while avoiding unwanted exposure to people, pets and other objects, is a game-changer for wireless power,” said Matt Reynolds, associate professor who worked on the project.
“Our proposed Fresnel-zone approach takes advantage of widely used LCD technology to enable seamless wireless power delivery to all kinds of smart devices. And we’re looking into alternatives to liquid crystals that could allow energy transfer at much higher power levels over greater distances.”
There are, of course, challenges to engineering such a wireless power transfer system. A powerful, low cost, highly efficient electromagnetic energy source would need to be developed. The system would have to automatically shut off if a person or a pet were to walk into the focused electromagnetic beam. And the software and controls for the metamaterial lens would have to be optimized to focus powerful beams while suppressing any unwanted secondary “ghost” beams.
“All of these issues are possible to overcome – they aren’t roadblocks,” said Smith. “We actually came up with some nice analytical formulas for coverage areas and efficiencies that would be possible. I think building a system like this, which could be embedded in the ceiling and wirelessly charge everything in a room, is a very feasible scheme. Moreover, there are versions of the concept that can deliver larger power over much larger distances.”
Sign up to the E&T News e-mail to get great stories like this delivered to your inbox every day.