A new method of 3D printing allows engineers to drastically reduce the weight of the parts they build without sacrificing mechanical strength.
The technique relies on a process called high speed sintering (HSS) which, unlike commercial 3D printers that use lasers, marks the shape of the part onto powdered plastic using heat-sensitive ink before activating the ink using an infra-red lamp, melting the powder layer by layer to build up the 3D part.
Researchers from the University of Sheffield have discovered they can control the density and strength of the final product by printing the ink at different shades of grey and that the best results are achieved by using less ink than is standard.
"All HSS work to date has involved printing 100 per cent black, but this doesn't get the best results," said Professor of Manufacturing Engineering Neil Hopkinson, from the University of Sheffield.
"We found that there is a point at which, as the ink levels increase, the mechanical properties start to reduce. This enabled us to identify the 'sweet spot' at which you can gain maximum strength with the minimum amount of ink."
The researchers are able to manipulate the density of the material by up to 40 per cent, opening the door to the possibility of 3D printing parts with differing densities at different points.
This would enable parts to have greatly reduced weight but equivalent mechanical strength – for example by having a dense outer shell and a lighter inner structure.
"3D printing has focused on optimising the shape of a part in order to reduce its weight and still retain its mechanical properties," said Professor Hopkinson, who will announce the findings today at the Solid Freeform Fabrication Symposium in Austin, Texas.
"Printing in greyscale will enable us to optimise the material instead, in a process that would be feasible for commercial manufacture. And by making parts with different densities out of one material, we can also make recycling more straightforward."
The ability to maximise strength while reducing weight means the technique would have obvious applications in the aerospace and automotive industries, but there are other sectors where it could bring benefits – one application envisaged by Professor Hopkinson is in sports footwear, where soles are currently made from dual density foams and could be printed in one material using the new technique.
Although still in development, HSS already holds great promise for industrial use as the process can be scaled to work at comparable speeds to conventional high volume processes, such as injection moulding.
The new findings will further reduce the costs of manufacturing using HSS, by reducing the volume of ink energy required to make a product.